Moxa NPort serial device servers connect RS-232/422/485 equipment to Ethernet, and as of 2026-11-20 Moxa's own advisory list carries NPort fixes published as recently as June and October 2026, for web-server buffer overflows, a command-port authorization flaw and a WebSocket denial of service. The recurring CVE families are authentication weaknesses (unauthenticated firmware upload, brute-forceable logins, empty or default passwords), hard-coded keys, and memory-safety bugs in the web and management services. Some NPort weaknesses have no firmware fix at all, so defending an NPort means updating to the fixed versions Moxa and CISA name, switching off HTTP, Telnet, SNMP and the Moxa utility service you do not use, replacing the default admin/moxa credentials, and letting only listed hosts reach the device.
Key takeaways
- An NPort turns a serial port into a network service, so every serial port and every management console becomes a TCP or UDP port that someone can reach.
- NPort CVEs fall into three families: weak or missing authentication, hard-coded secrets, and memory-safety bugs in the web and management services.
- Three NPort problems cannot be closed by updating firmware, so they need compensating controls or replacement.
- Moxa switches and routers carry their own authentication-bypass and hard-coded-secret CVEs, and they usually sit directly in front of the NPorts.
What does a Moxa NPort do, and which services does it expose?
An NPort turns a serial port into a network service, so every serial port and every management console becomes a TCP or UDP port that someone can reach. Moxa's NPort 5000 Series User Manual (version 7.6, August 2025) describes Real COM mode as a Windows COM or Linux TTY driver that maps the NPort's serial port to a local COM port on the host, so legacy serial software keeps working over Ethernet. Real COM mode supports up to 4 simultaneous connections, and the driver controls host access by checking the host's IP address. The default IP address is 192.168.127.254.
Moxa's Security Hardening Guide for the NPort 5000 Series (Tech Note v2.4) lists every port the family uses. Some models do not support every service.
| Service | Default | Port | Moxa's suggested setting |
|---|---|---|---|
| HTTP web console | Enabled | TCP 80 | Disable, to stop plaintext transmission |
| HTTPS web console | Enabled | TCP 443 | Enable, with a trusted certificate |
| Telnet console | Disabled | TCP 23 | Disable |
| SNMP agent | Disabled | UDP 161 | Disable; manage via HTTPS |
| Moxa Command (DSCI), used by Moxa utilities | Enabled | TCP 4900 and 14900, UDP 4800 | Disable, as it is not commonly used |
| DNS/WINS | Enabled | UDP 53, 137, 949 | Needed; cannot be disabled |
| Real COM mode (data, command) | Enabled | TCP 950 + (port − 1), TCP 966 + (port − 1) | Disable the operation mode on unused serial ports |
| TCP Server, UDP, RFC2217, Reverse Telnet, Pair Connection modes | Disabled | Default 4000 + serial port number (port 1 = 4001) | Enable only the mode the application needs |
The Moxa Command service is what Moxa's Windows tools talk to. The manual says the Device Search Utility broadcast-searches the LAN by MAC address, so it finds NPorts regardless of subnet, and that it can assign IP addresses, import and export configuration files and upgrade firmware. CISA's 2016 advisory ICSA-16-189-02 for the NPort 5232-N web console carried the same port advice from Moxa: disable TCP 80 and TCP 23, and keep UDP 161, UDP 4800 and TCP 4900 reachable only from trusted systems, noting that restricting 4800 and 4900 affects remote administration.
On credentials, the hardening guide says the default account is admin with the password moxa, and that the NPort 5110, 5130/5150, 5200 and IA5000 Series only have password protection, with default password moxa. Those older models also only support SNMP v1 and v2, so if you must poll them with SNMP, read our Net-SNMP agent guide for why community strings travel in clear text.
Which CVE families affect NPort serial device servers?
NPort CVEs fall into three families: weak or missing authentication, hard-coded secrets, and memory-safety bugs in the web and management services. The table lists the main ones with the affected range and fix the advisory names. NVD scores are NVD's own Primary CVSS v3.x scores; where NVD has not scored a record (status Deferred or Awaiting Analysis as of 2026-11-20), the score shown is Moxa's, as the CNA.
| CVE | Products and affected versions | What it allows | Score (scorer) | Fix per advisory |
|---|---|---|---|---|
| CVE-2016-9369 | NPort 5100, 5200, 5400, 5600, 5100A, 5200A, P5150A, 5000AI-M12, 5600-DT/DTL, 6x50, IA5450A | Firmware update over the network without authentication | 9.8 (NVD) | CISA ICSA-16-336-02A: for example 5110 v2.7, 5130/5150 v3.7, 5200 v2.9, 5400 v3.12, 5600 v3.8, 6000 v1.16 |
| CVE-2016-9361 | Same 2016 set | "Administration passwords can be retried without authenticating" (NVD) | 9.8 (NVD) | Same as above |
| CVE-2016-9366 | Same 2016 set | Brute force of the parameters needed to bypass authentication | 9.8 (NVD) | Same as above |
| CVE-2016-9363 | Same 2016 set | Buffer overflow that may allow unauthenticated remote code execution | 7.3 (NVD) | Same as above |
| CVE-2017-16727 | NPort W2150A, W2250A before 1.11 | Empty default password | 9.1 (NVD); CISA 6.5 | Firmware 2.1 (ICSA-17-355-01) |
| CVE-2021-32974 | NPort IAW5000A-I/O, firmware 2.2 or earlier | Unauthenticated OS command execution via the built-in web server | 9.8 (NVD) | Security patch from Moxa Technical Support |
| CVE-2022-2044, CVE-2022-2043 | NPort 5110 firmware 2.10 | Out-of-bounds writes: denial of service, possibly bricking the device | 8.2 and 7.5 (NVD) | Security patch from Moxa Technical Support (ICSA-22-207-04) |
| CVE-2023-4204 | NPort IAW5000A-I/O, firmware 2.2 and earlier | Hard-coded key that could facilitate firmware manipulation | 9.8 (NVD); Moxa 5.4 | Security patch from Moxa Technical Support |
| CVE-2023-4929 | All NPort 5000 Series firmware versions | Insufficient integrity checks on firmware updates | 8.8 (NVD); Moxa 6.5 | None; hardening guide only |
| CVE-2023-5627 | NPort 6000 Series, firmware 1.21 and earlier | Unauthenticated privileged access to the web service (recoverable password storage, broken crypto) | 7.5 (NVD) | Firmware 2.0 or later |
| CVE-2024-1220 | NPort W2150A/W2250A, firmware 2.3 and earlier | Unauthenticated stack overflow in the web server, denial of service | 7.5 (NVD); Moxa 8.2 | Security patch from Moxa Technical Support |
| CVE-2024-3576 | NPort 5100A, firmware 1.6 and earlier | Stored cross-site scripting in the web server | 8.3 (Moxa, CVSS v3.1) | Security patch from Moxa Technical Support |
| CVE-2025-1977 | NPort 6100-G2/6200-G2, firmware 1.0.0 | Read-only user changes configuration through the Moxa CLI Configuration tool | 7.7 (Moxa, CVSS v4.0) | Security patch v1.1.0 |
| CVE-2026-10831 | NPort 6000, 6100/6200, 6400/6600, firmware 2.3 and earlier; CN2600 4.6 and earlier | Unauthenticated break-signal commands on the command port disrupt an active serial session | 6.9 (Moxa, CVSS v4.0) | Security patch v2.3.9 (CN2600: v4.6.11) |
| CVE-2026-10829 | NPort W2150A-W4/W2250A-W4, firmware 1.5 and earlier | Stack overflow in the "Server location" web parameter; root code execution (high privileges needed) | 8.6 (Moxa, CVSS v4.0) | Security patch v1.5.1; replace W2150A/W2250A |
| CVE-2026-10825 | NPort 6100-G2/6200-G2, 6400-G2, 6600-G2, firmware 1.1.0 and earlier | Crafted WebSocket JSON from a low-privileged user reboots the device | 7.1 (Moxa, CVSS v4.0) | Firmware v1.2.0 or later |
Two caveats matter when you read these records. First, NVD's text for the 2016 set says, for example, "NPort 5110 versions prior to 2.6", while the CISA advisory lists 2.7 as the firmware that addresses the issues; use the CISA and Moxa fix versions as the threshold. Second, NVD and Moxa disagree widely on several scores: NVD rates CVE-2023-4204 at 9.8 where Moxa gives 5.4, so read the vector and the precondition rather than ranking by one number.
The 2016 authentication set is the one that matters most for old installations. CVE-2016-9369 means anyone who can reach the device can load firmware without a password, and CISA's ICSA-16-336-02A records that Moxa released no patch for the NPort 6110, discontinued in December 2008, and recommended upgrading the device instead. For the coding patterns behind command injection and hard-coded keys, see how to fix command injection in embedded firmware and how to fix hard-coded credentials in embedded firmware.
Which NPort weaknesses have no firmware fix?
Three NPort problems cannot be closed by updating firmware, so they need compensating controls or replacement.
Firmware integrity on the NPort 5000 SeriesMoxa advisory MPSA-233328 (CVE-2023-4929, version 1.2 of 18 June 2026) says all firmware versions of the 5000AI-M12, 5100, 5100A, 5200, 5200A, 5400, 5600, 5600-DT, IA5000, IA5000A, IA5000A-I/O, IAW5000A-I/O, P5150A and W2150A/W2250A families are affected, and that "due to design restrictions, we could not fix this vulnerability". Moxa points users to the hardening guide. In practice, control who can reach the web console and the Moxa utility service: the user manual says firmware is upgraded through the web console or, on the 5100, 5200 and IA5000, only through the Device Search Utility or NPort Administrator. Debug code on the UARTMPSA-257331 (CVE-2025-15017, CVSS v4.0 7.0 from Moxa) says an attacker with physical access can connect to the UART interface without authentication and reach internal debug functions. All firmware versions of the NPort 5000, 6000 and S9000 families are listed, and the mitigation is physical protection plus the hardening guides for the NPort 5000 (v2.4 or later), NPort 6000 (v2.3 or later) and NPort S9000 (v1.1 or later). Lock the cabinet. End-of-life wireless unitsMoxa's 2026 advisories MPSA-261910 and MPSA-261250 tell owners of the NPort W2150A/W2250A (firmware 2.3 and earlier) to replace the phased-out product with the W2150A-W4/W2250A-W4 at v1.5.1 or v1.5.9 or later.
Many Moxa fixes are delivered as a "security patch" from Moxa Technical Support rather than a public download, including the 2026 fixes for CVE-2026-10831 and CVE-2026-10829. Budget the time to request them, and record the patch build you receive, because it is the version your inventory will need to match later.
What about Moxa industrial Ethernet switches and secure routers?
Moxa switches and routers carry their own authentication-bypass and hard-coded-secret CVEs, and they usually sit directly in front of the NPorts. The 2024 to 2026 advisories with the widest reach:
- CVE-2024-9137, missing authentication in the Moxa service. Moxa says the affected products lack an authentication check on commands sent via the Moxa service, allowing unauthorized configuration download or upload. Moxa scores it 9.4 (CVSS v3.1) and 8.8 (CVSS v4.0). MPSA-241154 fixes the EDR-8010, EDR-G9004, EDR-G9010, EDF-G1002-BP, TN-4900 and OnCell G4302-LTE4 in firmware 3.13 or later, and its companion OS command injection, CVE-2024-9139 (Moxa 7.2, high privileges needed), also covers the EDR-810, fixed in 5.12.37. MPSA-241156 lists 53 affected Ethernet switch series across the EDS, ICS, IKS, SDS, PT and TN lines, with security patches such as 3.12.2 for the EDS-608, 611, 616 and 619.
- CVE-2024-12297, switch authentication bypass. MPSA-241409 says flaws in the authorization mechanism may allow brute-force guessing of credentials or MD5 collision attacks to forge authentication hashes. Moxa scores it 9.2 (CVSS v4.0). The TN-4500A and TN-5500A are fixed in v4.2 or later, and the TN-G4500 and TN-G6500 through security patch v5.5.255.
- CVE-2025-6950, hard-coded JWT signing key. MPSA-258121 says the routers sign authentication tokens with a hard-coded secret key, so an unauthenticated attacker can forge valid tokens and impersonate any user. Moxa scores it 9.9 (CVSS v4.0). The EDR-G9010, EDR-8010, EDF-G1002-BP, TN-4900, NAT-102 and NAT-108 are fixed in v3.21 or later and the OnCell G4302-LTE4 in v3.23 or later.
For a router or switch, the first control is the same as for an NPort: no management interface reachable from the internet or the office network. CISA's BOD 23-02 guide on internet-exposed management interfaces explains why that rule applies to any networked device's admin console.
How do you harden a Moxa NPort?
Hardening an NPort means cutting its open ports down to the one operation mode the serial device needs plus an encrypted console. These steps follow Moxa's NPort 5000 hardening guide and the mitigations in the advisories above:
Change the default credentialsReplace the admin/moxa default, create a separate administrator-level account and monitor the original admin account for brute-force attempts. Where the model supports it, set a password policy (the guide suggests a 16-character minimum with all complexity checks) and enable account login-failure lockout. Disable unused servicesTurn off HTTP (TCP 80), Telnet (TCP 23), SNMP (UDP 161) and Moxa Command (TCP 4900/14900, UDP 4800) under Basic Settings > Console Settings, and keep HTTPS on TCP 443 for configuration. Moxa's advisories for CVE-2024-1220 and CVE-2024-3576 go further and suggest disabling the web service once configuration is complete, until the patch is installed. Disable unused serial operation modesSet the operation mode of any unused serial port to Disabled so that its 950/966 or 4001-style port closes. Enable the Accessible IP ListAllow only the SCADA servers, HMIs and engineering hosts that need the device. The 5110, 5130/5150, 5200 and IA5000 support only a basic list that blocks operation-mode access from unlisted addresses. Use HTTPS with a trusted certificateThe guide says NPort 5000 HTTPS uses TLS 1.2, except on the NPort 5100 and 5200 Series, which do not support HTTPS. On those models, network restriction is the only protection for the console. Log centrallyEnable the local system log and a remote syslog server; the NPort records login failures, password changes, firmware upgrades and configuration import and export, which are the events that matter after an incident. Segment and restrictMoxa's advisories repeat CISA's baseline: keep control-system devices off the internet, put them behind firewalls isolated from business networks, and use VPNs for remote access. The Purdue model zones give a practical place for each NPort.
When the NPort carries Modbus RTU traffic from a TCP Server mode port, the serial protocol on top has no authentication of its own either; the Modbus security guide covers what to monitor and restrict for that layer.
How should you rank Moxa CVEs with KEV and EPSS?
No Moxa CVE is in the CISA KEV catalog, so exposure and missing authentication, not KEV status, should drive the order of work. As of 2026-11-20, the KEV catalog (version 2026.11.18, 1,786 entries) has no entry naming Moxa. FIRST EPSS scores dated 2026-11-19 put the 2016 NPort flaws highest: CVE-2016-9361 at 0.2022 (97.5th percentile), CVE-2016-9369 at 0.0896, CVE-2016-9366 at 0.0314, CVE-2016-4503 at 0.0285 and CVE-2021-32974 at 0.0270. Every 2024 to 2026 NPort, switch and router CVE in this guide scores below 0.015.
A practical order is: first, any NPort or switch management port reachable from outside the OT zone; second, devices still on firmware older than the 2016 CISA fix versions, because those accept firmware and passwords without authentication; third, the 2026 patches. The KEV and EPSS prioritization guide explains how to combine the two signals.
One inventory trap: as of 2026-11-20, every Moxa CVE in this guide from CVE-2024-3576 onward has no NVD CPE configuration, so a scanner that matches only on NVD CPE data will not flag them. Check those records against the affected-versions table in the Moxa advisory directly.
Worked example: what does an NPort review at a water pumping station find?
Synthetic example, not a real site. A pumping station has six NPort 5150 units bridging flow meters to SCADA, one NPort 5410, an NPort W2150A for a remote tank level sensor, and an EDS-508A switch.
| Observation | Why it matters | Action |
|---|---|---|
| Two NPort 5150 units report firmware 3.6 | Older than the 3.7 that CISA's ICSA-16-336-02A names for the 2016 unauthenticated firmware-update and password issues | Update to current 5130/5150 firmware |
| HTTP (80) and Moxa Command (4800/4900) open on all NPorts, reachable from the office VLAN | Plaintext console; utility service Moxa suggests disabling; CVE-2023-4929 firmware integrity cannot be fixed | Disable HTTP and Moxa Command; firewall to SCADA and engineering hosts |
| All units still use password moxa | Default credential in Moxa's own documentation | Change at the next visit; record in the password vault |
| NPort W2150A on firmware 2.3 | End-of-life; CVE-2024-1220 and the 2026 W-series advisories | Replace with W2150A-W4 at v1.5.9 or later |
| EDS-508A switch on firmware 3.11 | In the MPSA-241156 range for CVE-2024-9137 | Request security patch 3.11.4 from Moxa Technical Support |
How can SoftWSP help with Moxa NPort exposure?
A passive capture shows who talks to the NPorts without logging in to any of them. SoftWSP's OT Snapshot reads Zeek and ICSNPP logs from a mirror-port recording and builds a host-by-port inventory, including hosts talking on TCP 80, 23, 950, 966, 4001 or 4900 and UDP 4800 and 161, and lists remote-access sessions (SSH, Telnet, RDP, VNC) that cross from outside the private address range. It has no Real COM or Moxa Command decoder, so this traffic shows at connection level only, without serial data or commands, and it does not read NPort firmware versions from traffic. For a device list with NPort, switch and router models and firmware versions, Device & Firmware Security identifies components and versions and matches them against NVD, CISA KEV, FIRST EPSS and CISA ICS advisories. An engineer reviews every AI-drafted, cited report before it is sent.
What are the common pitfalls?
- Updating NPort firmware but leaving HTTP, Telnet and the Moxa Command service open; CVE-2023-4929 shows that firmware alone does not close the upload path.
- Firewalling only the serial data port (4001 or 950) and forgetting the command port; CVE-2026-10831 abuses the command interface on NPort 6000 units.
- Assuming a model is safe because the advisory says "contact Moxa Technical Support" and no public firmware download exists.
- Keeping end-of-life W2150A/W2250A units in service, which Moxa's 2026 advisories say to replace.
- Relying on NVD CPE matching for Moxa CVEs from 2024 onward, most of which carry no CPE configuration.
This guide draws on Moxa security advisories MPSA-230304, MPSA-232905, MPSA-233328, MPSA-238975, MPSA-241154, MPSA-241156, MPSA-241409, MPSA-246328, MPSA-251731, MPSA-257331, MPSA-258121, MPSA-261250, MPSA-261910, MPSA-262370 and MPSA-268270, Moxa's NPort 5000 hardening guide v2.4 and user manual v7.6, CISA ICS advisories ICSA-16-189-02, ICSA-16-336-02A, ICSA-17-355-01, ICSA-21-187-01 and ICSA-22-207-04, and NVD records. KEV and EPSS facts are as of 2026-11-20. It is general information, not a substitute for Moxa's product-specific security guidance or a current advisory search for your exact hardware and firmware version.
Put this guide to work
Frequently asked questions
Which network ports does a Moxa NPort open?
Moxa's Security Hardening Guide for the NPort 5000 Series (v2.4) lists the management services as HTTP on TCP 80, HTTPS on TCP 443, Telnet on TCP 23, the SNMP agent on UDP 161 and the Moxa Command (DSCI) service for Moxa utilities on TCP 4900 and 14900 and UDP 4800, with DNS/WINS on UDP 53, 137 and 949. HTTP, HTTPS and Moxa Command are enabled by default; Telnet and SNMP are disabled by default. Serial data uses separate ports per serial port: Real COM mode, the default operation mode, uses TCP 950 plus (port number minus 1) for data and TCP 966 plus (port number minus 1) for commands, while TCP Server, UDP, RFC2217 and Reverse Telnet modes default to 4000 plus the port number, so port 1 is 4001.
What is the default password on a Moxa NPort?
On NPort 5000 Series models with account management, the default account is admin with the password moxa, and the device shows a pop-up after login reminding you to change it, according to Moxa's NPort 5000 hardening guide. The NPort 5110, 5130/5150, 5200 and IA5000 Series only have password protection, with the default password moxa. Older wireless units were worse: CISA advisory ICSA-17-355-01 (CVE-2017-16727) says the NPort W2150A and W2250A before firmware 1.11 shipped with an empty default password. Change the password at commissioning, add a separate administrator-level account, and enable the password policy and login-failure lockout where the model supports them.
Is any Moxa vulnerability in the CISA KEV catalog?
No. As of 2026-11-20, CISA's Known Exploited Vulnerabilities catalog (version 2026.11.18, 1,786 entries) has no entry naming Moxa as vendor or product. FIRST EPSS scores dated 2026-11-19 are highest for the 2016 NPort flaws: CVE-2016-9361, the administration-password retry issue, scores 0.2022 (97.5th percentile) and CVE-2016-9369, unauthenticated firmware update, scores 0.0896. Every NPort, switch and router CVE from 2024 to 2026 in this guide scores below 0.015. Absence from KEV does not make an exposed NPort safe: the 2016 issues need no credentials, and the NPort 5000 firmware-integrity weakness (CVE-2023-4929) has no fix at all.
Can every NPort vulnerability be fixed with a firmware update?
No. Moxa advisory MPSA-233328 says that, due to design restrictions, it could not fix CVE-2023-4929, an improper validation of firmware integrity that affects all firmware versions of the NPort 5000 Series, including the 5100, 5100A, 5200, 5400, 5600, IA5000, IA5000A and W2150A/W2250A families. MPSA-257331 (CVE-2025-15017, active debug code on the UART interface) also lists all firmware versions of the NPort 5000, 6000 and S9000 families as affected, with physical-protection and hardening-guide mitigations rather than new firmware. For the end-of-life NPort W2150A/W2250A, Moxa's 2026 advisories say to replace the unit with the NPort W2150A-W4/W2250A-W4.
Do Moxa switch and router flaws matter if I only run NPorts?
Usually yes, because the NPort sits behind an industrial switch or secure router that is often a Moxa EDS, ICS, IKS, PT, TN or EDR unit. Moxa advisory MPSA-241156 lists 53 Ethernet switch series affected by CVE-2024-9137, missing authentication on commands sent through the Moxa service, which Moxa scores 9.4 (CVSS v3.1). MPSA-258121 covers CVE-2025-6950, a hard-coded secret key used to sign authentication tokens on EDR, TN-4900, NAT and OnCell G4302 routers, scored 9.9 (CVSS v4.0) by Moxa and fixed in firmware 3.21 or later (3.23 for the OnCell G4302-LTE4). A compromised switch or router can expose every NPort behind it.
Sources
- Moxa Security Advisories (Moxa PSIRT list of all advisories)
- Moxa: The Security Hardening Guide for the NPort 5000 Series, Tech Note v2.4 (PDF)
- Moxa: NPort 5000 Series User Manual, Version 7.6, August 2025 (PDF)
- Moxa MPSA-233328: NPort 5000 Series Firmware Improper Validation of Integrity Check Vulnerability (CVE-2023-4929, V1.2, 18 June 2026)
- Moxa MPSA-257331: Active Debug Code Vulnerability in Serial Device Servers (CVE-2025-15017, V1.1, 20 October 2026)
- Moxa MPSA-262370: Improper Authorization Vulnerability in Serial Device Servers (CVE-2026-10831, 16 June 2026)
- Moxa MPSA-261910: Format String and Stack-based Buffer Overflow in Serial Device Servers (CVE-2026-10828, CVE-2026-10829, 16 June 2026)
- Moxa MPSA-268270: Improper Validation of Input in Serial Device Servers (CVE-2026-10825, V1.1, 2 November 2026)
- Moxa MPSA-261250: Stack Buffer Overflow in Wireless Device Servers (CVE-2026-111548, 27 October 2026)
- Moxa MPSA-251731: Multiple Vulnerabilities in NPort 6100-G2/6200-G2 Series (CVE-2025-1977, CVE-2025-2026, 31 December 2025)
- Moxa MPSA-232905: NPort 6000 Series Incorrect Implementation of Authentication Algorithm (CVE-2023-5627, 1 November 2023)
- Moxa MPSA-230304: NPort IAW5000A-I/O Series Hardcoded Credential Vulnerability (CVE-2023-4204, 16 August 2023)
- Moxa MPSA-238975: NPort W2150A/W2250A Series Web Server Stack-based Buffer Overflow (CVE-2024-1220, 7 March 2024)
- Moxa MPSA-246328: NPort 5100A Series Stored XSS Vulnerability (CVE-2024-3576, 7 May 2024)
- Moxa MPSA-241154: Missing Authentication and OS Command Injection in Routers and Network Security Appliances (CVE-2024-9137, CVE-2024-9139, V1.3)
- Moxa MPSA-241156: Missing Authentication Vulnerability in Ethernet Switches (CVE-2024-9137, V1.1)
- Moxa MPSA-241409: Frontend Authorization Logic Disclosure in Ethernet Switches (CVE-2024-12297, V1.1, 14 April 2026)
- Moxa MPSA-258121: Multiple Vulnerabilities in Network Security Appliances and Routers (CVE-2025-6892 to CVE-2025-6950, V1.1)
- CISA ICS Advisory ICSA-16-336-02A: Moxa NPort Device Vulnerabilities (CSAF, CVE-2016-9348 to CVE-2016-9371)
- CISA ICS Advisory ICSA-16-189-02: Moxa Device Server Web Console Authorization Bypass (CSAF, CVE-2016-4503)
- CISA ICS Advisory ICSA-17-355-01: Moxa NPort W2150A and W2250A (CSAF, CVE-2017-16727)
- CISA ICS Advisory ICSA-22-207-04: MOXA NPort 5110 (CSAF, CVE-2022-2043, CVE-2022-2044)
- CISA ICS Advisory ICSA-21-187-01: Moxa NPort IAW5000A-I/O Series Serial Device Server (CSAF, CVE-2021-32974 and others)
- NVD: CVE-2016-9369 (NPort firmware update over the network without authentication)
- NVD: CVE-2023-4929 (NPort 5000 Series firmware integrity check)
- CISA Known Exploited Vulnerabilities catalog (data mirror on GitHub)
- FIRST: Exploit Prediction Scoring System (EPSS)
About this guide
SoftWSP OT/ICS Desk
Covers the OT/ICS security cluster: 77 guides.

In this cluster
Questions about this page?
