CVE-2011-3486 is a remote denial-of-service flaw in Beckhoff TwinCAT 2.11.0.2004 and earlier: one crafted UDP packet to port 48899, the ADS discovery and route port, triggers an out-of-bounds read and crashes the service. NVD scores it CVSS v2 5.0. Beckhoff issued a patch; CISA says to firewall UDP 48899 where it cannot be applied.
Vulnerability summary
CVSS base score
5
Medium severity
EPSS score (FIRST)
49.6%
Probability of exploitation in the wild in the next 30 days
CISA KEV catalog
No
Not listed
Published
Vulnerability ID: CVE-2011-3486 · Source: NVD
Affected components
| Component | CPE | Version range |
|---|---|---|
| Beckhoff TwinCAT 2 | cpe:2.3:a:beckhoff:twincat:*:*:*:*:*:*:*:* | Up to and including 2.11.0.2004 (NVD CPE, also 2.7, 2.8, 2.9, 2.10); TwinCAT 2.10, 2.11 and 2.11R2 per CISA ICSA-11-279-04; patch available from Beckhoff |
What does this mean for affected devices?
NVD describes CVE-2011-3486 as follows: "Beckhoff TwinCAT 2.11.0.2004 and earlier allows remote attackers to cause a denial of service via a crafted request to UDP port 48899, which triggers an out-of-bounds read." NVD's Primary score is CVSS v2 5.0 (AV:N/AC:L/Au:N/C:N/I:N/A:P); the record predates CVSS v3, so there is no v3 score. NVD classifies it as CWE-119, and its CPE configuration covers TwinCAT up to and including 2.11.0.2004, listing 2.7, 2.8, 2.9 and 2.10 explicitly. MITRE assigned the record, published on 2011-09-16 (CVE record).
What does CVE-2011-3486 do on a TwinCAT system?
UDP port 48899 carries Beckhoff's ADS companion protocol, which Rapid7 describes as the UDP broadcast protocol for device discovery and for changes to the ADS router's routing table. Luigi Auriemma's advisory of 2011-09-13 lists TwinCAT 2.11.0.2004 and earlier on Windows, classes the bug as a remote "Denial of Service caused by an invalid read access", and publishes a one-line proof of concept: a single crafted UDP datagram sent to port 48899 with his udpsz tool. The advisory said "No fix" at the time. ICS-CERT then issued alert ICS-ALERT-11-256-06, which NVD lists as a reference.
Which TwinCAT versions are affected and how is it fixed?
CISA's advisory ICSA-11-279-04, "Beckhoff TwinCAT Read Access Violation" (CSAF), lists TwinCAT 2.10, 2.11 and 2.11R2 as affected and scores it CVSS v2 5.0 with CWE-119. It says Beckhoff developed a patch, which customers obtain from Beckhoff along with installation instructions, and that users who cannot apply it should deploy a firewall and restrict traffic on UDP port 48899. CISA's general advice applies too: keep control system networks off the internet and behind firewalls, separated from business networks.
TwinCAT 2.11 builds this old are still found on legacy machines. On those, the practical check is whether UDP 48899 is reachable from any network beyond the engineering workstations. The same port broke again in 2019: an empty UDP packet stops the ADS Discovery Service in builds before TwinCAT 2 2305 and TwinCAT 3.1 4024.4 (CVE-2019-5636), so active network scans of TwinCAT segments need care.
How likely is exploitation?
It is not in the CISA KEV catalog as of 2026-11-21 (catalog version 2026.11.20, 1,790 entries; no entry names Beckhoff). FIRST EPSS gives it 0.4965, the 98.9th percentile, in the 2026-11-20 dataset (FIRST EPSS), the highest EPSS of any Beckhoff TwinCAT CVE we track. A public one-packet proof of concept is a plausible reason for that score; EPSS predicts exploitation activity and does not confirm attacks.
Our Beckhoff TwinCAT and ADS security guide explains the ADS ports and route model. Related Beckhoff advisories: the design flaws CVE-2017-16726 and CVE-2019-16871, and the ADS password brute force CVE-2014-5414. The memory-corruption fix guide covers bounds checking in protocol parsers.
Evidence
- TwinCAT 2.11.0.2004 and earlier, crafted request to UDP 48899, out-of-bounds read, DoS; NVD Primary CVSS v2 5.0 AV:N/AC:L/Au:N/C:N/I:N/A:P; no v3 metric; CWE-119; CPE twincat <= 2.11.0.2004 plus 2.7, 2.8, 2.9, 2.10; references include ICS-ALERT-11-256-06 and the Auriemma advisory; status Modified; published 2011-09-16; read 2026-11-21. — NVD
- State PUBLISHED, assigner MITRE, published 2011-09-16; checked 2026-11-21. — CVE.org
- ICSA-11-279-04 'Beckhoff TwinCAT Read Access Violation': Beckhoff TwinCAT 2.10, 2.11, 2.11R2; CWE-119; CVSS v2 5.0; Beckhoff has developed a patch, obtained from Beckhoff; if the patch cannot be applied, deploy a firewall and restrict traffic on 48899/UDP; read 2026-11-21. — CISA ICS advisory / CSAF
- Beckhoff TwinCAT <= 2.11.0.2004, Windows, remote DoS 'caused by an invalid read access', dated 13 Sep 2011; PoC: udpsz with a crafted payload to port 48899; 'No fix' at publication; read 2026-11-21. — Luigi Auriemma advisory
- Beckhoff's proprietary companion protocol to ADS uses UDP broadcast packets for device discovery and routing-table modifications; the handler on UDP port 48899 (CVE-2019-5636); read 2026-11-21. — Rapid7 R7-2019-32
- Not in the CISA KEV catalog version 2026.11.20 (1,790 entries, released 2026-11-20); no entry with Beckhoff as vendor; checked 2026-11-21. — CISA KEV
- EPSS 0.4965, percentile 0.98923, dataset 2026-11-20, read 2026-11-21; other TwinCAT CVEs on this site score below 0.06. — FIRST EPSS

Related advisories
Sources
- NVD: CVE-2011-3486
- CVE.org record CVE-2011-3486
- CISA ICSA-11-279-04: Beckhoff TwinCAT Read Access Violation
- CISA CSAF: ICSA-11-279-04 (machine-readable advisory)
- Luigi Auriemma: Beckhoff TwinCAT DoS advisory (2011-09-13)
- Rapid7 R7-2019-32: denial-of-service vulnerabilities in Beckhoff TwinCAT (ADS discovery protocol)
- CISA KEV
- FIRST EPSS
Frequently asked questions
Which TwinCAT versions does CVE-2011-3486 affect?
TwinCAT 2.11.0.2004 and earlier per NVD and the researcher's advisory; CISA ICSA-11-279-04 lists TwinCAT 2.10, 2.11 and 2.11R2. TwinCAT 3 is not listed (per NVD, CISA and Luigi Auriemma's advisory).
How do you fix CVE-2011-3486?
Install the patch Beckhoff developed for it, which CISA says customers obtain from Beckhoff. Where it cannot be applied, restrict traffic to UDP port 48899 with a firewall so only engineering workstations can reach it (per CISA ICSA-11-279-04).
Why is the EPSS score so high for a 2011 denial-of-service flaw?
FIRST EPSS gives it 0.4965, the 98.9th percentile, in the 2026-11-20 dataset. The flaw is remote, needs no login and has a public one-packet proof of concept. EPSS is a probability model, and the CVE is not in the CISA KEV catalog as of 2026-11-21 (per FIRST EPSS, CISA KEV and the researcher's advisory).
Does a crash on UDP 48899 stop the PLC program?
The sources describe a denial of service of the TwinCAT service that handles UDP 48899, not the effect on a running PLC task, so plan for loss of discovery and route management at minimum and test on a spare system (per NVD and CISA ICSA-11-279-04).
Questions about this page?