Security Advisory

CVE-2013-2811: Catapult and GE DNP3 Driver TCP Loop DoS

Last updated:
  • CVE-2013-2811

CVE-2013-2811 is an improper input validation flaw (CWE-20) in the Catapult DNP3 I/O driver that GE ships for Proficy iFIX and CIMPLICITY: a crafted DNP3 TCP packet sends the driver into an infinite loop and stops the master station. NVD scores it 7.1 under CVSS v2. CISA's 2014 advisory names drivers 7.20L, 8.2.62.7 and 9.0.62.7 as the fix.

Vulnerability summary

CVSS base score

7.1

High severity

EPSS score (FIRST)

1.8%

Probability of exploitation in the wild in the next 30 days

CISA KEV catalog

No

Not listed

Published

Vulnerability ID: CVE-2013-2811 · Source: NVD

Affected components

ComponentCPEVersion range
Catapult Software DNP3 I/O driver (DNPDrv.exe)cpe:2.3:a:catapultsoftware:catapult_dnp3_i\/o_driver:*:*:*:*:*:*:*:*7.20.56 and earlier (NVD); 7.20.60 named as the fix in 2013 (ICSA-13-297-01)
GE Proficy HMI/SCADA DNP3 I/O driver in iFIX and CIMPLICITYcpe:2.3:a:ge:intelligent_platforms_proficy_dnp3_i\/o_driver:*:j:*:*:*:*:*:*7.20j (Catapult v7.2.0.56) and prior (ICSA-13-297-02); ICSA-14-287-01 adds 7.20k (Catapult v7.20.60) and prior, fixed in 7.20L (7.20.62.7) for iFIX, 8.2.62.7 for CIMPLICITY 8.2 and earlier, 9.0.62.7 for CIMPLICITY 9.0

What does this mean for affected devices?

NVD's description: "The (1) Catapult DNP3 I/O driver before 7.2.0.60 and the (2) GE Intelligent Platforms Proficy DNP3 I/O driver before 7.20k, as used in DNPDrv.exe (aka the DNP master station server) in GE Intelligent Platforms Proficy HMI/SCADA - CIMPLICITY and iFIX, allow remote attackers to cause a denial of service (infinite loop) via a crafted DNP3 TCP packet." NVD's Primary score is CVSS v2 7.1 (AV:N/AC:M/Au:N/C:N/I:N/A:C) with CWE-20. The CPE configuration covers the Catapult driver up to 7.20.56, the GE driver 7.20 to 7.20j, CIMPLICITY 4.01 to 8.2 and iFIX 5.0 and 5.1. The record was published on 2013-11-22 (NVD).

Which advisories cover it?

CISA published two advisories in October 2013, and a third in October 2014:

  • ICSA-13-297-01 (Catapult Software): the DNP driver 7.20.56 and iFIX or CIMPLICITY servers with that driver installed, including Proficy Process Systems. Fix: driver 7.20.60 (GE IP 7.20k) or newer.
  • ICSA-13-297-02 (GE): the Proficy HMI/SCADA DNP3 I/O driver 7.20j (Catapult v7.2.0.56) and prior. Fix: 7.20k, with GE security advisory KB15805.
  • ICSA-14-287-01 (GE): lists 7.20k (Catapult v7.20.60) and prior as affected under the same CVE, scored CVSS v2 7.8. Fix: driver 7.20L (7.20.62.7) or newer for all iFIX versions, 8.2.62.7 for CIMPLICITY 8.2 and earlier, 9.0.62.7 for CIMPLICITY 9.0.

The product lists and fixes come from CISA's CSAF records (13-297-01, 13-297-02, 14-287-01). The ICS Advisory Project index dates the two 2013 advisories to 2013-10-24 and the 2014 one to 2014-10-14, and maps all three to CVE-2013-2811.

Why is 7.20k not enough?

NVD's range ends before 7.20k, so a version check against NVD treats a 7.20k driver as fixed, while CISA's 2014 advisory lists it as affected. Use the 2014 versions as the floor. The driver is the master station side: DNPDrv.exe polls RTUs and other outstations, so a looping driver blinds the HMI to the field. The serial-line variant is CVE-2013-2823, and CVE-2013-2783 is the same kind of flaw in IOServer's DNP3 driver. Our DNP3 protocol security guide covers these driver bugs next to Secure Authentication.

How do you mitigate it?

Install the driver version from ICSA-14-287-01 for your iFIX or CIMPLICITY release. The researchers quoted in the 2013 advisories also suggest blocking DNP3 traffic from crossing onto business or corporate networks with an IPS or firewall that has DNP3-specific rules. DNP3 runs on TCP port 20000 (IANA), so a host firewall on the SCADA server can accept it only from the outstations it polls. Our IEC 62443-2-3 patch management guide covers testing a driver update before it reaches a live server.

CVE-2013-2811 is not in the CISA KEV catalog as of 2026-11-18 (catalog version 2026.11.17). FIRST EPSS gives it 0.01846, the 79th percentile, in the 2026-11-17 dataset (CISA KEV, FIRST EPSS).

How to fix this class of issueNo dedicated SoftWSP guide covers this weakness class; the fix is usually the vendor patch or firmware update referenced above. Our related guide explains how to plan and verify it: NIST SP 800-40 Rev. 4: enterprise patch management planning, explained.

Evidence

  • NVD: Catapult DNP3 I/O driver before 7.2.0.60 and GE Proficy DNP3 I/O driver before 7.20k, DNPDrv.exe (DNP master station server) in CIMPLICITY and iFIX, infinite loop via crafted DNP3 TCP packet; Primary CVSS v2 7.1 AV:N/AC:M/Au:N/C:N/I:N/A:C; CWE-20; CPEs Catapult <=7.20.56, GE driver 7.20-7.20j, CIMPLICITY 4.01/7.5/8.0/8.1/8.2, iFIX 5.0/5.1; published 2013-11-22. — NVD
  • ICSA-13-297-01 CSAF: Catapult DNP driver 7.20.56 and iFIX/CIMPLICITY servers with it (incl. Proficy Process Systems); fix driver 7.20.60 (GE IP 7.20k) or newer; researchers suggest blocking DNP3 traffic from business/corporate networks with an IPS or firewall with DNP3-specific rules. — CISA CSAF
  • ICSA-13-297-02 CSAF: GE Proficy HMI/SCADA DNP3 I/O Driver <=7.20j (Catapult v7.2.0.56); fix 7.20k (Catapult v7.2.0.60); GE security advisory KB15805. — CISA CSAF
  • ICSA-14-287-01 CSAF: CVE-2013-2811 CVSS v2 7.8; affected includes DNP driver v7.20k and Catapult <=v7.20.60; fix 7.20L (7.20.62.7) for iFIX, 8.2.62.7 for CIMPLICITY 8.2 and prior, 9.0.62.7 for CIMPLICITY 9.0. — CISA CSAF
  • ICS Advisory Project: ICSA-13-297-01 and -02 released 10/24/2013 (updated 12/17/2013), ICSA-14-287-01 released 10/14/2014 (updated 8/29/2018), all mapped to CVE-2013-2811. — ICS Advisory Project
  • IANA: dnp, port 20000, TCP and UDP. — IANA
  • CVE-2013-2811 is not in the CISA KEV catalog, version 2026.11.17 (1,782 entries), checked 2026-11-18. — CISA KEV
  • EPSS 0.01846, percentile 0.79432, dataset 2026-11-17. — FIRST EPSS

Related advisories

Sources

  1. NVD
  2. CISA ICSA-13-297-01: Catapult Software DNP3 Driver
  3. CISA ICSA-13-297-02: GE Proficy DNP3
  4. CISA ICSA-14-287-01: GE Proficy HMI/SCADA DNP3 Driver
  5. CISA CSAF: icsa-14-287-01.json
  6. ICS Advisory Project: CISA ICS advisory index
  7. IANA service name and port number registry
  8. CISA KEV
  9. FIRST EPSS

Frequently asked questions

Which driver version fixes CVE-2013-2811?

CISA's 2014 advisory ICSA-14-287-01 lists 7.20k and earlier as affected and names DNP driver 7.20L (7.20.62.7) for iFIX, 8.2.62.7 for CIMPLICITY 8.2 and earlier, and 9.0.62.7 for CIMPLICITY 9.0. NVD's range still ends before 7.20k (per CISA CSAF and NVD).

Which GE products carry the vulnerable DNP3 driver?

Proficy HMI/SCADA iFIX and CIMPLICITY servers with the DNP3 I/O driver installed, including iFIX or CIMPLICITY installations that are part of Proficy Process Systems. The driver runs as DNPDrv.exe, the DNP master station server (per CISA ICSA-13-297-02 and NVD).

How does CVE-2013-2811 differ from CVE-2013-2823?

Both are infinite loops in the same driver. CVE-2013-2811 is triggered by a crafted DNP3 TCP packet and scored 7.1 under CVSS v2; CVE-2013-2823 needs crafted input over a serial line and is scored 4.7 (per NVD and CISA ICSA-13-297-01).

Is CVE-2013-2811 in the CISA KEV catalog?

No, not as of 2026-11-18 (catalog version 2026.11.17). FIRST EPSS gives it 0.01846, the 79th percentile, in the 2026-11-17 dataset (per CISA KEV and FIRST EPSS).