Security Advisory

CVE-2013-2783: IOServer DNP3 Driver Infinite Loop DoS

Last updated:
  • CVE-2013-2783

CVE-2013-2783 is an improper input validation flaw (CWE-20) in the DNP3 driver of IOServer, an OPC server for Windows that links HMI and SCADA systems to field devices: crafted data sent to TCP port 20000 puts driver version 1.0.19.0 into an infinite loop, which stops it from polling outstations. NVD scores it 7.1 under CVSS v2. CISA reports an updated driver from IOServer.

Vulnerability summary

CVSS base score

7.1

High severity

EPSS score (FIRST)

1.3%

Probability of exploitation in the wild in the next 30 days

CISA KEV catalog

No

Not listed

Published

Vulnerability ID: CVE-2013-2783 · Source: NVD

Affected components

ComponentCPEVersion range
IOServer (OPC server) DNP3 drivercpe:2.3:a:ioserver:ioserver:1.0.19.0:*:*:*:*:*:*:*Supported drivers v1.0.19.0 (NVD, CISA ICSA-13-161-01); an updated driver package from IOServer addresses it (CISA)

What does this mean for affected devices?

NVD's description: "The DNP3 driver in IOServer drivers 1.0.19.0 allows remote attackers to cause a denial of service (infinite loop) or obtain unspecified control via crafted data to TCP port 20000." NVD's Primary score is CVSS v2 7.1 (AV:N/AC:M/Au:N/C:N/I:N/A:C) with CWE-20 (Improper Input Validation); the record has no CVSS v3 score. The CPE configuration lists IOServer 1.0.19.0 only. The record was published on 2013-06-14 (NVD).

Which product and versions does CISA list?

CISA's advisory ICSA-13-161-01, "IOServer DNP3 Improper Input Validation", lists IOServer "Supported drivers: v1.0.19.0" as the affected product. CISA's CSAF record of that advisory, converted in 2025 and marked as extracted from unstructured data, gives the same product, the CVSS v2 7.1 score and the mitigation: an updated driver package that IOServer made available on its website. The ICS Advisory Project index of CISA advisories dates the advisory to 2013-06-10, last updated 2018-09-06, and lists commercial facilities, energy, oil and gas, and government facilities as sectors, with deployments from Australia, where the vendor is based, to North and South America, Asia and Europe.

Why does port 20000 matter?

TCP and UDP port 20000 are the IANA-registered ports for DNP (IANA service name registry). The IOServer website describes the product as an OPC server for Windows that lets HMI and SCADA systems exchange plant floor data with field devices, with master and slave protocol implementations over TCP/IP, serial, modem and radio links. A DNP3 driver stuck in a loop therefore leaves those clients without fresh values from the field. The bug needs no login: anything that can send TCP to the driver can trigger it. The same class of input-handling flaw appears in the Catapult and GE Proficy DNP3 drivers, CVE-2013-2811 over TCP and CVE-2013-2823 over serial lines. Our DNP3 protocol security guide explains why these driver flaws are separate from DNP3 Secure Authentication.

How do you fix or mitigate it?

Replace the 1.0.19.0 DNP3 driver with the vendor's updated package, then confirm the version in the IOServer driver list. Until that is done, CISA's general measures apply: keep control system networks behind firewalls, away from business networks and the internet, and allow port 20000 only between the master and its known outstations. Our IEC 62443-2-3 patch management guide covers how to test and roll out a driver update on a running SCADA server. Newer DNP3 stack flaws, such as CVE-2020-6996 in Triangle MicroWorks' outstation libraries, show that input validation remains the weak point.

CVE-2013-2783 is not in the CISA KEV catalog as of 2026-11-18 (catalog version 2026.11.17). FIRST EPSS gives it 0.01255, the 70th percentile, in the 2026-11-17 dataset (CISA KEV, FIRST EPSS).

How to fix this class of issueNo dedicated SoftWSP guide covers this weakness class; the fix is usually the vendor patch or firmware update referenced above. Our related guide explains how to plan and verify it: NIST SP 800-40 Rev. 4: enterprise patch management planning, explained.

Evidence

  • NVD: DNP3 driver in IOServer drivers 1.0.19.0, denial of service (infinite loop) or unspecified control via crafted data to TCP port 20000; Primary CVSS v2 7.1 AV:N/AC:M/Au:N/C:N/I:N/A:C; CWE-20; CPE ioserver 1.0.19.0; published 2013-06-14. — NVD
  • CISA ICSA-13-161-01 CSAF: product 'IOServer Supported drivers: v1.0.19.0'; CVE-2013-2783 CVSS v2 7.1, CWE-20; mitigation: IOServer produced an updated driver package available on its website; CSAF extracted from unstructured data. — CISA CSAF
  • ICS Advisory Project master CSV: ICSA-13-161-01 released 6/10/2013, last updated 9/6/2018; sectors Commercial Facilities, Energy, oil and gas, Government Facilities; deployed Australia, Canada, New Zealand, United States, South America, Asia, Europe; HQ Australia. — ICS Advisory Project
  • IANA service name registry: dnp, port 20000, TCP and UDP. — IANA
  • IOServer website: OPC Server for Windows; lets OPC clients such as HMI and SCADA systems exchange plant floor data with PLCs; master and slave protocol implementation; TCP/IP, UDP/IP, serial (direct, telephone modem or radio). — IOServer
  • CVE-2013-2783 is not in the CISA KEV catalog, version 2026.11.17 (1,782 entries), checked 2026-11-18. — CISA KEV
  • EPSS 0.01255, percentile 0.70018, dataset 2026-11-17. — FIRST EPSS

Related advisories

Sources

  1. NVD
  2. CISA ICSA-13-161-01: IOServer DNP3 Improper Input Validation
  3. CISA CSAF: icsa-13-161-01.json
  4. ICS Advisory Project: CISA ICS advisory index
  5. IANA service name and port number registry
  6. IOServer: product overview
  7. CISA KEV
  8. FIRST EPSS

Frequently asked questions

Which IOServer version is affected by CVE-2013-2783?

NVD and CISA ICSA-13-161-01 list the IOServer DNP3 driver at version 1.0.19.0. CISA reports that IOServer produced an updated driver package on its website to address it (per NVD and the CISA CSAF record).

Can CVE-2013-2783 be exploited without credentials?

Yes. Crafted data sent to TCP port 20000, the IANA-registered DNP port, is enough to put the driver into an infinite loop; NVD scores the CVSS v2 vector with no authentication. Restrict port 20000 to known outstations (per NVD and IANA).

What happens to the SCADA system when the IOServer DNP3 driver loops?

The driver stops processing DNP3 traffic, so the OPC clients and HMIs that read through IOServer lose fresh data from the field outstations until the driver is restarted. NVD also lists unspecified control as a possible outcome (per NVD and CISA ICSA-13-161-01).

Is CVE-2013-2783 in the CISA KEV catalog?

No, not as of 2026-11-18 (catalog version 2026.11.17). FIRST EPSS gives it 0.01255, the 70th percentile, in the 2026-11-17 dataset (per CISA KEV and FIRST EPSS).