CVE-2019-6260, known as pantsdown, is a design flaw in ASPEED AST2400 and AST2500 BMC chips: AHB bridges let the host, and in rare serial-console setups the network, read and write the BMC's physical memory, so root on the host can reflash or brick the BMC. NVD scores it 9.8; IBM scores it 6.7. OpenBMC 2.6 carries the mitigations; other stacks need vendor firmware.
Vulnerability summary
CVSS base score
9.8
Critical severity
EPSS score (FIRST)
4.2%
Probability of exploitation in the wild in the next 30 days
CISA KEV catalog
No
Not listed
Published
Vulnerability ID: CVE-2019-6260 · Source: NVD
Affected components
| Component | CPE | Version range |
|---|---|---|
| ASPEED AST2400 BMC SoC (hardware and firmware) | cpe:2.3:o:aspeedtech:ast2400_firmware:*:*:*:*:*:*:*:* | All firmware versions in NVD's CPE configuration (running on cpe:2.3:h:aspeedtech:ast2400:-); fix depends on how platform firmware configures the bridges (OpenBMC advisory #3475) |
| ASPEED AST2500 BMC SoC (hardware and firmware) | cpe:2.3:o:aspeedtech:ast2500_firmware:*:*:*:*:*:*:*:* | All firmware versions in NVD's CPE configuration (running on cpe:2.3:h:aspeedtech:ast2500:-); fix depends on how platform firmware configures the bridges (OpenBMC advisory #3475) |
| OpenBMC on ASPEED-based platforms | — | Up to at least 2.6 per Stewart Smith's disclosure; OpenBMC states the mitigations are in the 2.6 level for all supported ASPEED-based platforms; not in NVD's CPE configuration |
| IBM Power Systems OpenPOWER firmware (AC922, LC921, LC922, S812LC, S821LC, S822LC, CS821, CS822, 7063-CR1 HMC) | — | OP910, OP920, OP810, OP815, OP820, OP825 affected; fixed in OP910.30/OP910.31, OP920.10, OP820.30, OP825.30 or OP825.41 depending on model (IBM security bulletin 869130); not in NVD's CPE configuration |
| NetApp FAS/AFF Baseboard Management Controller | cpe:2.3:a:netapp:fas\/aff_baseboard_management_controller:*:*:*:*:*:*:*:* | Affected: FAS/AFF BMC of A320/C190/A220/FAS2720/FAS2750/A800, NetApp HCI BMCs and SolidFire BMC; fixes per product via NetApp support downloads (NetApp NTAP-20190314-0001, final, updated 2021-11-01) |
What does this mean for affected devices?
NVD describes CVE-2019-6260 as a hardware and firmware design issue: the ASPEED AST2400 and AST2500 baseboard management controller (BMC) SoCs "implement Advanced High-performance Bus (AHB) bridges, which allow arbitrary read and write access to the BMC's physical address space from the host (or from the network in unusual cases where the BMC console uart is attached to a serial concentrator)." The record covers eight paths: iLPC2AHB bridge parts I and II, the PCIe VGA P2A bridge, X-DMA, the UART-based SoC debug interface, the LPC2AHB bridge, the PCIe BMC P2A bridge and watchdog setup. NVD's Primary score is CVSS v3.0 9.8 (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H), with CWE listed as NVD-CWE-noinfo. MITRE assigned the record, which carries no CNA score, and it was published on 2019-01-22 (NVD, CVE record).
Why do scores for pantsdown differ so much?
The question is whether the host-to-BMC link counts as a network. The OpenBMC security advisory says "Access to these features from the host platform requires root user privilege" and notes "some debate in the CVSS score if this is a local or remote vulnerability"; it publishes an adjacent-network vector (AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H plus temporal and environmental metrics). IBM's Power Systems security bulletin scores it 6.7 with CVSS:3.0/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H. NVD's 9.8 treats it as remote and unauthenticated. For a device maker the practical reading is: anyone with root on the host, such as a bare-metal cloud tenant or customer code on an appliance, can take over the BMC.
What can an attacker do through the AHB bridges?
The OpenBMC advisory lists four consequences: reflash or dump the firmware of a running BMC from the host, read and write BMC RAM, configure an in-band BMC console from the host, and "brick" the BMC by disabling its CPU clock until the next AC power cycle. Several bridges are enabled at cold start. Two traps matter in testing: the bit that disables the iLPC2AHB bridge removes only write access, so reads continue until SuperIO decoding (0x2E/0x4E) is turned off, and a watchdog reset in "System Reset" mode reopens every cold-start bridge until firmware reconfigures them. Stewart Smith's disclosure of 2019-01-23 names OpenBMC, AMI's BMC and Supermicro as affected stacks and lists OpenBMC "up to at least 2.6, all supported Aspeed-based platforms".
Which products have fixes?
The OpenBMC advisory states that "the mitigations are in the 2.6 level of OpenBMC for all supported ASPEED-based platforms", and that a complete solution is platform dependent and can require both BMC and host firmware changes, plus an updated ASPEED video driver on the host when the P2A bridge is disabled. Stewart Smith's post places the OpenPOWER host firmware patches in op-build v2.0.11. IBM's bulletin lists OpenPOWER releases OP910, OP920, OP810, OP815, OP820 and OP825 as affected and gives fixed levels per machine, for example OP920.10 (BMC 2.04) for Power System LC921 and LC922, and OP910.30 or OP910.31 for AC922 models. NetApp's advisory NTAP-20190314-0001 (final, last updated 2021-11-01) lists as affected the FAS/AFF BMC of the A320, C190, A220, FAS2720, FAS2750 and A800, the NetApp HCI BMCs (including H410C, H610C, H610S and H615C) and the SolidFire BMC, scores the CVE 9.8 and names no workaround. Other OEM boards need the board vendor's own statement.
How should a device maker handle CVE-2019-6260?
Record the BMC SoC in the SBOM: an AST2400 or AST2500 puts this CVE in scope whatever the firmware vendor. Then confirm with the board vendor which bridges the shipped firmware closes, test from the host that they stay closed after a BMC reboot, and treat the remaining bridges as a reason to keep host and BMC in the same trust domain. Our BMC, IPMI and Redfish vulnerabilities guide covers stack identification, and NIST SP 800-193 treats the BMC as platform firmware that needs protection and recovery. Other BMC flaws on the same class of controller are the IPMI RAKP hash leak CVE-2013-4786 and the KEV-listed Redfish bypass CVE-2024-54085.
CVE-2019-6260 is not in the CISA KEV catalog as of 2026-11-19 (catalog version 2026.11.18, 1,786 entries). FIRST EPSS gives it 0.04212, the 91.2nd percentile, in the 2026-11-18 dataset (CISA KEV, FIRST EPSS).
Evidence
- NVD: ASPEED AST2400/AST2500 AHB bridges allow arbitrary read/write of the BMC's physical address space from the host; eight listed cases; NVD Primary CVSS v3.0 9.8 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H, v2 7.5; CWE NVD-CWE-noinfo; CPE aspeedtech ast2400_firmware and ast2500_firmware (all versions) and NetApp FAS/AFF BMC; published 2019-01-22; status Modified, read 2026-11-19. — NVD
- OpenBMC Security Advisory CVE-2019-6260 (GitHub issue #3475, opened 2019-01-28): consequences reflash/dump BMC firmware, arbitrary RAM read/write, in-band console, brick BMC until AC power cycle; host access requires root; iLPC2AHB disable bit removes only writes; watchdog System Reset mode reopens bridges; AV:A vector with debate local vs remote; 'The mitigations are in the 2.6 level of OpenBMC for all supported ASPEED-based platforms'; complete solution platform dependent, may need host firmware and an updated ASPEED video driver, read 2026-11-19. — OpenBMC
- Stewart Smith, 'CVE-2019-6260: Gaining control of BMC from the host processor' (2019-01-23): nicknamed pantsdown; affects OpenBMC, AMI's BMC and SuperMicro; OpenBMC versions affected up to at least 2.6 on all supported Aspeed-based platforms; OpenPOWER host firmware patches in op-build v2.0.11; root on the host needed for the LPC and PCIe bridges, read 2026-11-19. — flamingspork.com
- IBM Security Bulletin (node 869130, created 2019-01-25): CVSS 3.0 6.7 AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H; P9 OpenPOWER OP910 and OP920 and P8 OP810, OP815, OP820, OP825 affected; fixes include OP910.30 (AC922 8335-GTG), OP910.31 (AC922 8335-GTC/GTW, LC922 9006-22C/5104-22C), OP920.10 BMC 2.04 (LC921 9006-12P, LC922 9006-22P), OP820.30, OP825.30, OP825.41, read 2026-11-19. — IBM
- CVE record: state PUBLISHED, assigner MITRE, published 2019-01-22, vendor and product n/a, no CNA CVSS; references flamingspork.com, NetApp NTAP-20190314-0001 and Brocade security advisory 2019-785, checked 2026-11-19. — CVE.org
- Not in the CISA KEV catalog version 2026.11.18 (1,786 entries), checked 2026-11-19. — CISA KEV
- EPSS 0.04212, percentile 0.91173, dataset 2026-11-18, read 2026-11-19. — FIRST EPSS
- NetApp NTAP-20190314-0001 'CVE-2019-6260 ASPEED BMC Vulnerability in NetApp Products', status Final, published 2019-03-14, updated 2021-11-01: affected FAS/AFF BMC A320/C190/A220/FAS2720/FAS2750/A800, NetApp HCI BMC H300S/H500S/H700S/H300E/H500E/H700E/H410S, H410C, H610C, H610S, H615C, SolidFire BMC; NetApp CVSS 3.0 9.8 AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H; workarounds 'None at this time.'; read 2026-11-19. — NetApp Product Security

Related advisories
Sources
- NVD
- OpenBMC Security Advisory CVE-2019-6260 (GitHub issue #3475)
- Stewart Smith: CVE-2019-6260, gaining control of BMC from the host processor
- IBM Security Bulletin: Power System update to address CVE-2019-6260
- CVE.org record CVE-2019-6260
- CISA KEV
- FIRST EPSS
- NetApp NTAP-20190314-0001: CVE-2019-6260 ASPEED BMC Vulnerability in NetApp Products
Frequently asked questions
Does an attacker need access to the host to exploit CVE-2019-6260?
In the usual case, yes: the LPC and PCIe bridges are reached from the host, and access to these features requires root user privilege on the host. The exception is a BMC whose console UART is attached to a serial concentrator, which exposes the UART debug interface to the network (per the OpenBMC security advisory and NVD).
Which OpenBMC release contains the pantsdown mitigations?
OpenBMC states that the mitigations are in the 2.6 level of OpenBMC for all supported ASPEED-based platforms, while the full fix is platform dependent and can need host firmware changes and an updated ASPEED video driver (per the OpenBMC security advisory, GitHub issue #3475).
Which IBM Power Systems firmware fixes CVE-2019-6260?
IBM lists OpenPOWER releases OP910, OP920, OP810, OP815, OP820 and OP825 as affected; fixed levels include OP920.10 (BMC 2.04) for LC921 and LC922 (9006-12P, 9006-22P), OP910.30 or OP910.31 for AC922 models, OP820.30 for S812LC and S822LC (8335-GTB), OP825.30 for S821LC and S822LC (8001 models) and the 7063-CR1 HMC, and OP825.41 for the CS821 and CS822 Nutanix systems (per IBM's security bulletin).
Is CVE-2019-6260 exploited in the wild?
It is not in the CISA KEV catalog as of 2026-11-19 (catalog version 2026.11.18). FIRST EPSS gives it 0.04212, the 91.2nd percentile, in the 2026-11-18 dataset (per CISA KEV and FIRST EPSS).
Questions about this page?