Security Advisory

CVE-2019-5074: WAGO I/O-Check Stack Overflow (6626)

Last updated:
  • CVE-2019-5074

CVE-2019-5074 is a stack buffer overflow in the I/O-Check commissioning service (iocheckd, TCP port 6626) of WAGO PFC100 and PFC200 controllers. Unauthenticated packets can overwrite a stored value and then overflow a stack buffer, giving remote code execution. NVD scores it 9.8; WAGO fixes it in firmware FW15.

Vulnerability summary

CVSS base score

9.8

Critical severity

EPSS score (FIRST)

3.3%

Probability of exploitation in the wild in the next 30 days

CISA KEV catalog

No

Not listed

Published

Vulnerability ID: CVE-2019-5074 · Source: NVD

Affected components

ComponentCPEVersion range
WAGO PFC200 (750-82xx/xxx-xxx), iocheckd I/O-Check servicecpe:2.3:o:wago:pfc_200_firmware:03.01.07\(13\):*:*:*:*:*:*:*Firmware before FW15; fixed in FW15 (CERT@VDE VDE-2019-022). NVD lists only firmware 03.01.07(13) for PFC200; Talos also tested 03.00.39(12)
WAGO PFC100 (750-81xx/xxx-xxx), iocheckd I/O-Check servicecpe:2.3:o:wago:pfc_100_firmware:03.00.39\(12\):*:*:*:*:*:*:*Firmware before FW15; fixed in FW15 (CERT@VDE VDE-2019-022). NVD lists firmware 03.00.39(12)

What does this mean for affected devices?

NVD carries the Cisco Talos description: "An exploitable stack buffer overflow vulnerability exists in the iocheckd service ''I/O-Check'' functionality of WAGO PFC200 Firmware version 03.01.07(13), WAGO PFC200 Firmware version 03.00.39(12) and WAGO PFC100 Firmware version 03.00.39(12)." NVD's Primary score is CVSS v3.1 9.8 (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H) with CWE-787; the record was published on 2019-12-18 (NVD, CVE record).

How does the overflow work?

The I/O-Check service implements a WAGO configuration protocol that reads and writes values stored on the controller. In TALOS-2019-0863, Talos explains that iocheckd copies the system value QS-STRING into a 0x20-byte stack buffer with an incorrect length when it builds the reply to a BC_ProductLabel message. An attacker can first send an unauthenticated packet that overwrites QS-STRING, then request the product label, so attacker-controlled data overflows the stack. Talos scores it 9.8 and classes it CWE-805. Kelly Leuschner of Cisco Talos found it; Talos reported it to WAGO on 2019-07-30 and published on 2019-12-16.

Which WAGO controllers are affected, and which firmware fixes it?

WAGO's coordinated advisory VDE-2019-022 names Series PFC100 (750-81xx/xxx-xxx) and Series PFC200 (750-82xx/xxx-xxx) and says CVE-2019-5074 is fixed by "a firmware update >= FW 15", together with CVE-2019-5073, 5075, 5079, 5081 and CVE-2019-5082. The CSAF version scores it 9.8. CISA's ICSA-20-065-01 repeats the FW15 advice. NVD's CPE lists only PFC200 firmware 03.01.07(13) and PFC100 firmware 03.00.39(12), so a scanner keyed on NVD alone misses other firmware below FW15.

What should operators do?

WAGO's first measure is not the update: "The I/O-Check service protocol is only needed during installation and commissioning, not during normal operations. It is highly recommended to disable the IP-port 6626 after commissioning." That matters beyond this CVE, because the same port also carries CVE-2019-5080, for which WAGO's 2025 advisory lists every firmware version as affected, and the command injection CVE-2020-12522. Update to FW15 or later, switch I/O-Check off, and keep port 6626 unreachable from anything except the commissioning laptop. The WAGO PFC controller guide covers the full WAGO attack surface, and the memory corruption fix guide covers this class of bug.

CVE-2019-5074 is not in the CISA KEV catalog as of 2026-11-21 (catalog version 2026.11.20, 1,790 entries). FIRST EPSS gives it 0.0328, the 88.7th percentile, in the 2026-11-20 dataset (CISA KEV, FIRST EPSS).

How to fix this class of issueThis advisory's weakness class is Memory corruption. Our practical guide covers how to detect, fix, verify and disclose it: How to fix memory corruption in embedded firmware.

Evidence

  • NVD (read 2026-11-21): status Modified; published 2019-12-18; NVD Primary CVSS v3.1 9.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H, v2 10.0; CWE-787 (NVD); CPE pfc_200_firmware 03.01.07(13) and pfc_100_firmware 03.00.39(12); reference TALOS-2019-0863. — NVD
  • TALOS-2019-0863 (read 2026-11-21): stack buffer overflow in iocheckd when building the BC_ProductLabel reply from QS-STRING; QS-STRING writable with an unauthenticated packet; CVSS v3.0 9.8; CWE-805; tested PFC200 03.01.07(13), 03.00.39(12), PFC100 03.00.39(12); vendor disclosure 2019-07-30, public release 2019-12-16; discovered by Kelly Leuschner of Cisco Talos. — Cisco Talos
  • CERT@VDE VDE-2019-022 (initial release 2019-12-16), HTML and CSAF read 2026-11-21: affects Series PFC100 (750-81xx/xxx-xxx) and PFC200 (750-82xx/xxx-xxx); CVSS v3.1 9.8, CWE-787; disable IP port 6626 after commissioning; CVE-2019-5073, 5074, 5075, 5079, 5081, 5082 fixed by firmware >= FW15. — CERT@VDE VDE-2019-022
  • CISA ICSA-20-065-01 CSAF (2020-03-05), read 2026-11-21: CVE-2019-5074 CVSS v3.0 9.8, CWE-805; WAGO recommends FW15 or above and disabling port 6626 after commissioning. — CISA CSAF ICSA-20-065-01
  • CVE record (checked 2026-11-21): state PUBLISHED, CNA Talos, published 2019-12-18; affected WAGO PFC200 03.01.07(13), 03.00.39(12), PFC100 03.00.39(12). — CVE.org
  • Not in the CISA KEV catalog, catalog version 2026.11.20, 1,790 entries, checked 2026-11-21. — CISA KEV
  • EPSS 0.0328, percentile 0.88745, dataset 2026-11-20, read 2026-11-21. — FIRST EPSS

Related advisories

Sources

  1. NVD
  2. CERT@VDE VDE-2019-022: WAGO multiple vulnerabilities in I/O-Check service in multiple devices
  3. CERT@VDE VDE-2019-022 CSAF (machine-readable advisory)
  4. Cisco Talos TALOS-2019-0863: WAGO PFC200 iocheckd service I/O-Check stack buffer overflow
  5. CISA CSAF: ICSA-20-065-01 WAGO I/O-CHECK (machine-readable advisory)
  6. CVE.org record CVE-2019-5074
  7. CISA KEV
  8. FIRST EPSS

Frequently asked questions

Which WAGO firmware fixes CVE-2019-5074?

Firmware FW15 or later for Series PFC100 (750-81xx) and Series PFC200 (750-82xx), per CERT@VDE VDE-2019-022. CISA ICSA-20-065-01 gives the same advice.

Does an attacker need a login?

No. Talos says an attacker can send unauthenticated packets to the I/O-Check service on port 6626 to overwrite the QS-STRING value and then trigger the stack overflow, which results in code execution (TALOS-2019-0863).

Is updating to FW15 enough?

It fixes this CVE, but WAGO still recommends disabling port 6626 after commissioning, because I/O-Check is only needed during installation. CVE-2019-5080 on the same service has no fixed firmware according to WAGO advisory VDE-2025-080.

Is CVE-2019-5074 exploited in the wild?

It is not listed in the CISA KEV catalog as of 2026-11-21 (catalog version 2026.11.20, 1,790 entries). FIRST EPSS rates it 0.0328 (88.7th percentile) in the 2026-11-20 dataset.