CVE-2026-78135 is an authentication bypass in strongSwan's IKEv2 state machine: a responder that accepts EAP can process a CREATE_CHILD_SA request before authentication finishes, so an unauthenticated peer may get a usable Child SA. NVD scores it 7.3. strongSwan 6.1.0 fixes it, and Stormshield lists its SNS firewalls as affected.
Vulnerability summary
CVSS base score
7.3
High severity
EPSS score (FIRST)
0.4%
Probability of exploitation in the wild in the next 30 days
CISA KEV catalog
No
Not listed
Published
Vulnerability ID: CVE-2026-78135 · Source: NVD
Affected components
| Component | CPE | Version range |
|---|---|---|
| strongSwan (libcharon) | cpe:2.3:a:strongswan:strongswan:*:*:*:*:*:*:*:* | NVD: 5.9.7 through 6.0.7; fixed in 6.1.0, patches for older releases (strongSwan advisory) |
| Stormshield Network Security (SNS) firewall appliances | — | SNS 5.1.0 to 5.1.3, 5.0.0 to 5.0.9, 4.8.0 to 4.8.19 and 4.3.0 to 4.3.44; fixed in SNS 5.1.4 EA, 5.0.10, 4.8.20 LTSB and 4.3.45 QS (Stormshield STORM-2026-028) |
What does this mean for affected devices?
CVE-2026-78135 is a missing state check in libcharon, the IKEv2 engine of strongSwan's charon daemon. The strongSwan advisory of 7 September 2026 explains that libcharon rejects CREATE_CHILD_SA requests on unestablished IKE SAs only while no passive exchanges are queued. When the initiator authenticates with EAP, IKE_AUTH and the first Child SA are deferred and their tasks wait in the passive queue, so a CREATE_CHILD_SA request arriving at that moment skips the check and is processed as if the IKE SA were established. The result, in strongSwan's words, "can allow an unauthenticated peer to potentially establish a usable Child SA", that is, an IPsec tunnel on a gateway that never finished checking who the peer is.
The conditions are narrow but common on remote-access gateways. The responder must accept EAP, and it must either configure no virtual IP address pool or specify an explicit remote traffic selector; otherwise traffic selector negotiation fails. The half-open IKE SA and any installed IPsec SA are removed after the default 30-second timeout. strongSwan states that remote code execution is not possible, that servers which do not accept EAP are not vulnerable, and that roadwarrior setups with a virtual IP pool and remote_ts = dynamic, the default, are also safe. Versions before 5.9.7 accept the request too early but fail authentication, which is why 5.9.7 is the first affected release.
NVD lists the CVE as analyzed and scores it 7.3 with vector CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L, while MITRE as the CNA gives 5.6 with high attack complexity and names CWE-841, improper enforcement of behavioral workflow (NVD). strongSwan 6.1.0 fixes it, and strongSwan publishes a patch for older releases. The Debian security tracker lists fixed packages from DSA-6487-1 for trixie and DLA-4879-1 for bookworm.
The device angle comes from Stormshield. Its advisory STORM-2026-028, released on 16 October 2026 and updated on 20 October, lists CVE-2026-78135 among six strongSwan flaws in Stormshield Network Security (SNS) firewall appliances, where strongSwan builds the IPsec tunnels. Affected are SNS 5.1.0 to 5.1.3, 5.0.0 to 5.0.9, 4.8.0 to 4.8.19 and 4.3.0 to 4.3.44. As a workaround, Stormshield says SNS appliances that do not accept EAP authentication are not vulnerable to this CVE; the fixed releases are SNS 5.1.4 EA, 5.0.10, 4.8.20 LTSB and 4.3.45 QS.
Router firmware built from the OpenWrt packages feed shows how long the fix takes to reach images. Checked on 2026-11-17, the feed's main branch still builds strongSwan 6.0.7 but gained the upstream patches for all eleven 6.1.0 issues, including this one, in a commit of 16 November 2026. The openwrt-25.12 branch (6.0.7) and the openwrt-24.10 branch (5.9.14) carry no CVE patches, so images built from them keep the affected code.
The CVE is not in the CISA KEV catalog as of 2026-11-17 (catalog version 2026.11.13). FIRST EPSS gives it 0.00424, the 37th percentile, in the 2026-11-16 dataset (CISA KEV, FIRST EPSS).
On a gateway image, read the version from the Starting IKE charon daemon (strongSwan string in the charon binary, list the EAP plugins that are built in, and check whether connections that accept EAP use a virtual IP pool with dynamic remote traffic selectors. Our OpenVPN and strongSwan firmware guide shows how to find the VPN stack in an image and ranks this CVE among the eleven fixed in strongSwan 6.1.0, and our authentication bypass fix guide covers the bug class. For the OpenVPN side of the same gateways, see the CVE-2026-35058 tls-crypt-v2 server crash.
Evidence
- libcharon skips the unestablished-IKE-SA check for CREATE_CHILD_SA while passive tasks are queued; with EAP the request can create a usable Child SA before authentication; needs no IP pool or an explicit remote traffic selector; half-open SAs removed after 30 s; no RCE; servers without EAP, or with a virtual IP pool and remote_ts = dynamic, not vulnerable; 5.9.7 and later affected; fixed in 6.1.0 with patches for older releases. — strongSwan advisory
- NVD status Analyzed; NVD Primary CVSS v3.1 7.3 (AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L); MITRE CNA 5.6 (AC:H) and CWE-841; CPE range 5.9.7 through 6.0.7. — NVD
- Debian fixed packages: trixie via DSA-6487-1, bookworm via DLA-4879-1. — Debian security tracker
- STORM-2026-028 (v1 16 October 2026, v2 20 October 2026): SNS 5.1.0 to 5.1.3, 5.0.0 to 5.0.9, 4.8.0 to 4.8.19 and 4.3.0 to 4.3.44 affected; SNS not accepting EAP is not vulnerable to CVE-2026-78135; fixed in SNS 5.1.4 EA, 5.0.10, 4.8.20 LTSB and 4.3.45 QS. — Stormshield STORM-2026-028
- OpenWrt packages feed, checked 2026-11-17: main branch strongSwan 6.0.7 with upstream patches for the eleven 6.1.0 issues added on 16 November 2026; openwrt-25.12 (6.0.7) and openwrt-24.10 (5.9.14) carry no CVE patches. — OpenWrt packages feed
- Not in the CISA KEV catalog as of 2026-11-17 (catalog version 2026.11.13). — CISA KEV
- EPSS 0.00424 (37th percentile), dataset 2026-11-16, read 2026-11-17. — FIRST EPSS

Related advisories
Sources
Frequently asked questions
Which strongSwan versions are affected by CVE-2026-78135?
strongSwan 5.9.7 through 6.0.7. Version 6.1.0 fixes it, and strongSwan publishes a patch for older releases (per the strongSwan advisory and NVD).
Which strongSwan setups are exposed to CVE-2026-78135?
Responders that accept EAP authentication and either configure no virtual IP address pool or set an explicit remote traffic selector. Servers that do not accept EAP, and roadwarrior setups with a virtual IP pool and remote_ts = dynamic, are not vulnerable (per the strongSwan advisory).
Which firewalls are affected by CVE-2026-78135?
Stormshield lists its Stormshield Network Security (SNS) appliances: SNS 5.1.0 to 5.1.3, 5.0.0 to 5.0.9, 4.8.0 to 4.8.19 and 4.3.0 to 4.3.44, fixed in SNS 5.1.4 EA, 5.0.10, 4.8.20 LTSB and 4.3.45 QS. Appliances that do not accept EAP are not vulnerable (per Stormshield STORM-2026-028).
Can CVE-2026-78135 lead to remote code execution?
No. strongSwan states that remote code execution is not possible; the impact is a usable Child SA for an unauthenticated peer until the half-open IKE SA times out after 30 seconds (per the strongSwan advisory).
Is CVE-2026-78135 exploited?
It is not in the CISA KEV catalog as of 2026-11-17 (catalog version 2026.11.13). FIRST EPSS gives it 0.00424, the 37th percentile, in the 2026-11-16 dataset (per CISA KEV and FIRST EPSS).
Questions about this page?