CVE-2019-9496 is a Dragonblood denial-of-service flaw in hostapd up to 2.7: on a WPA3-Personal (SAE) access point, an invalid authentication sequence crashes hostapd while it processes the SAE confirm message, so an attacker in radio range, with no password, can take the Wi-Fi network down. Synology named its RT2600ac and MR2200ac routers.
Vulnerability summary
CVSS base score
7.5
High severity
EPSS score (FIRST)
4.6%
Probability of exploitation in the wild in the next 30 days
CISA KEV catalog
No
Not listed
Published
Vulnerability ID: CVE-2019-9496 · Source: NVD
Affected components
| Component | CPE | Version range |
|---|---|---|
| hostapd (w1.fi hostap project) in AP mode with SAE support | cpe:2.3:a:w1.fi:hostapd:*:*:*:*:*:*:*:* | up to and including 2.7 with CONFIG_SAE=y and SAE enabled at runtime; fixed in 2.8 (w1.fi 2019-3) |
| Synology Router Manager (SRM) 1.2 on RT2600ac and MR2200ac routers | cpe:2.3:a:synology:router_manager:*:*:*:*:*:*:*:* | SRM 1.2 before 1.2.3-8017 (Synology-SA-19:16) |
What does this mean for affected devices?
CVE-2019-9496 is the access point crash of the Dragonblood disclosure. NVD's record says "an invalid authentication sequence could result in the hostapd process terminating due to missing state validation steps when processing the SAE confirm message when in hostapd/AP mode" and that an attacker "may force the hostapd process to terminate, performing a denial of service attack". NVD scores it 7.5 under CVSS v3.0, vector CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H, with CWE-287 as primary weakness; CERT/CC adds CWE-642 (NVD).
The w1.fi 2019-3 advisory, published 2019-04-10, names the cause as "a NULL pointer dereference when processing SAE confirm message" and states the reach plainly: "An attacker in radio range of an access point using hostapd in SAE configuration could use this issue to perform a denial of service attack by forcing the hostapd process to terminate." The client side was not affected; the advisory notes that equivalent sequences against the wpa_supplicant station code were already covered by tests. The vulnerable configuration is any hostapd built with CONFIG_SAE=y and with SAE enabled at runtime. The fix is the single commit "SAE: Fix confirm message validation in error cases", listed under v2.8 (2019-04-21) in the hostapd ChangeLog.
The device angle is the first wave of WPA3 routers. CERT/CC VU#871675 lists Synology as affected, and Synology-SA-19:16, first published 2019-04-11, lists Synology Router Manager (SRM) 1.2 on the RT2600ac and MR2200ac as affected by the Dragonblood attacks, CVE-2019-9494 and CVE-2019-9496, at moderate severity. The fix is SRM 1.2.3-8017 or later, released per the advisory's 2019-07-31 revision, with an interim patch for SRM 1.2.1 and later. Synology scores CVE-2019-9496 at 6.5, vector CVSS:3.0/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H, an adjacent-network rating that fits a radio-range attack. In the same CERT/CC note AVM said its FRITZ!Repeater 3000, then its only WPA3 product, with WPA3 off in the factory settings, had received a Lab firmware update for the WPA3 issues. FreeBSD-SA-19:03.wpa fixed the base system's hostapd on 2019-05-14.
The CVE is not in the CISA KEV catalog as of 2026-11-17 (catalog version 2026.11.13), and FIRST EPSS gives it 0.04631, the 91.86th percentile, in the 2026-11-16 dataset (CISA KEV, FIRST EPSS). Treat it as high on any SAE access point still on hostapd 2.7 or older: the attack needs no credentials and no foothold on the device.
To fix it, ship hostapd 2.8 or later, or backport the 2019-3 commit, and make sure the init system restarts hostapd if it exits. Our hostapd and wpa_supplicant vulnerabilities guide shows how to tell whether CONFIG_SAE is compiled in (the sae_password keyword) and how to read the version, and our memory corruption fix guide covers NULL dereference defects in C daemons. The SAE side channel disclosed alongside it is CVE-2019-9494; the EAP-pwd side channel is CVE-2019-9495.
Evidence
- hostapd terminates on an invalid SAE confirm sequence in AP mode; NVD CVSS v3.0 7.5 (AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H), CWE-287 (NVD), CWE-642 (CERT/CC). — NVD
- NULL pointer dereference in SAE confirm processing; attacker in radio range; CONFIG_SAE=y plus runtime SAE; fix commit "SAE: Fix confirm message validation in error cases"; update to v2.8. — w1.fi security advisory 2019-3
- Synology-SA-19:16: SRM 1.2 on RT2600ac and MR2200ac affected by CVE-2019-9494 and CVE-2019-9496 (moderate), fixed in SRM 1.2.3-8017; Synology CVSS 6.5 (AV:A). — Synology-SA-19:16
- VU#871675 lists Synology as affected; AVM statement on FRITZ!Repeater 3000 update. — CERT/CC VU#871675
- Not in the CISA KEV catalog as of 2026-11-17 (catalog version 2026.11.13). — CISA KEV
- EPSS 0.04631 (91.86th percentile), dataset 2026-11-16, read 2026-11-17. — FIRST EPSS

Related advisories
Sources
Frequently asked questions
Does CVE-2019-9496 need the Wi-Fi password?
No. The w1.fi 2019-3 advisory says an attacker in radio range of an access point that uses hostapd in SAE configuration can force the hostapd process to terminate. No credentials and no code on the device are needed, which is why NVD rates it 7.5.
Are WPA3 client devices affected by CVE-2019-9496?
No. The flaw is in hostapd in access point mode. Upstream notes that the equivalent sequences against the wpa_supplicant station implementation were already handled. A wpa_supplicant running an AP-mode network with SAE should still be updated.
Which Synology routers were affected and what is the fix?
Synology-SA-19:16 lists SRM 1.2 on the RT2600ac and MR2200ac and names SRM 1.2.3-8017 or later as the fix, with an interim patch for SRM 1.2.1 and later (per Synology).
Is CVE-2019-9496 in the CISA KEV catalog?
No, not as of 2026-11-17 (catalog version 2026.11.13). FIRST EPSS gives it 0.04631, the 91.86th percentile, in the 2026-11-16 dataset (per CISA KEV and FIRST EPSS).
Questions about this page?